A patented water distribution system maximises cooling efficiency, ensuring a balanced flow of water across the cooling pads.
Wide range of extras include air sensors, link modes, upgraded controllers and an adjustable roof stand.
Specifically designed axial fans provide more energy efficiency and even quieter operation than standard evaporative units.
Three inverter motors use far less energy than a standard fan and motor.
The inverters allow more accurate control of temperatures, keeping them within a +/-5% range of the set temperature.
Unobtrusive on any roof and thereby ideal where zoning regulations require discrete roof mounted equipment.
|Model Number - Indoor Unit
|Cooling Capacity (kW)
|0.43 each motor
|1.5 each motor
|Indoor unit Dimensions (HxWxD) (mm)
|890 x 1935 x 2150
|1275 x 1935 x 2150
* C = Cooling H = Heating
The Evaporative unit was installed in November 2017 and has been faultless… Last week outside temperature 41 degrees and the unit kept the house around 26-27 degrees. I did run the unit from the morning before things got really hot. Highly recommend this unit. Installed by All Points Airconditioning Wagga Wagga.
The motor buzzes a little at low speed (typical of old style motor controllers) and on fast speed the fan/air flow is a little noisy but acceptable. It’s still giving the maximum 14 deg-C temperature reduction. Got up on the roof recently for the annual check and clean out – the original pads look a little weather effected (grey and starting to flake a little) but still working very effectively. Won’t need to be changed soon unless I notice a drop in efficiency.
Good honest service with friendly staff. They kindly checked out my heater and gave me all the information I needed to move forward.